Durapipe FLS - Flow Control Solutions

The NEW FLOWX3 Insertion Magmeters are suitable to measure flowrate in both metal and thermoplastic pipelines. No moving mechanical parts and the high quality materials allow the measurement of liquids where suspended solids can be present or of abrasive liquids as long as they are conductive and homogeneous.

The sensor can be assembled into the standard Durapipe FLS fitting range so it is perfectly interchangeable with the paddlewheel sensors. The new design allows an accurate flow measurement over a wide dynamic range in pipe sizes from DN15 (0.5”) to DN600 (24”).

The NEW F3.60M & F3.63 offer frequency output for use with Durapipe FLS flow instrumentation and 4-20 mA output for long distance transmission and PLC connection.

Insertion magmeters are compatible with the following instrumentation:

  • Flow X3 F9.00
  • Flow X3 F9.50

Products are avaliable with the following sensor option:

  • Hot tap – for insertion into pressurised systems
  • With or without digital display


Durapipe FLS - Flow Control Solutions
Durapipe FLS - Flow Control Solutions

Typical Applications

  • Water and waste water treatment
  • Raw water intake
  • Industrial water distribution
  • Textile industry
  • Pools, spas and aquariums
  • HVAC
  • Processing and manufacturing industry

Key Product Features

  • No moving parts, no wear, maintenance free
  • High mechanical resistance
  • For DN15 (0.5”) to DN600 (24”) pipes
  • Flow Rate Range F3.60M: from 0.05 to 8 m/s (0.15 to 25 ft/s)
  • Flow Rate Range F3.63M: from 0.15 to 8 m/s (0.5 to 25 ft/s)
  • Accurate measurement of dirty liquids
  • Blind 4-20 mA or frequency output
  • Zero flow output with empty pipe
  • Bi-directional flow measurement
  • Low pressure drop

Key Product Information

  • Size Range - 20mm to 110mm (socket) and 20mm to 400mm (butt)
  • Pressure Rating - PN10 or PN6 (Metric)
  • Temperature rating - 0° to 100°C